Performance Tool W2500P 3/8 In. Drive Impact Driver with 4 Tips
Ideal for loosening firmly tightened or rusted screws or bolts. Removable hex adaptor allows use with 3/8″ drive sockets & accessories. Heavy duty blow molded storage case. Phillips sizes: #2 & #3. Flat sizes: 5/16″ & 3/8″. replacement bits – see part number w2500-36mm.
Product Features
Ideal for loosening firmly tightened or rusted screws or bolts.
Removable hex adaptor allows use with 3/8″ drive sockets & Accessories.
Stuck No More I used this tool to remove 2 stuck screws on an old Singer 128 sewing machine. It was able to cleanly loosen the stuck screws with a firm hit with a hammer. One thing you need to make sure is too use the correct size impact screwdriver bit or you will damage the screw head slot. The kit only came with one small slotted bit, so I had to use one from another set of screwdriver bits.This impact driver can be used to remove both left and right hand threaded screws. You set the…
This review is only for the 1/4 inch impact driver. I have not used the 5 included bits, my assumption is that they are typical poor-to-average quality that likely won’t hold up well, especially with repeated uses, but again that’s just an assumption not fact. Quality bits alone cost more than this set so set your expectations at that level. But the driver is good quality for what’s intended. It will not help in every situation, but when it does help, you’ll wonder how you ever went without it…
VTurboWay 8 Color 48 PCS, Cable End Crimps, Bike Cable End Caps, Alloy Road Mountain Bikes Brake Tips Shifter, 6 PCS for each Color of Red Black Golden Silver Green Blue Purple Orange
XiKe 4 Pack 99502HNR Ball Bearing ID 5/8″ x OD 1-3/8″ x Width 7/16″, Double Seal and Snap Ring, Stable Performance and Cost-Effective, Go Kart Wheel Mini Bikes, Mower and More.
Screwdriver Bit Set Socket Wrenches, Professional Electronics Precision Magnetic Driver Micro Repair Tool Kit for Bike, Watch, iPhone, iPad, Tablet, PC, MacBook
Loading...
Stuck No More I used this tool to remove 2 stuck screws on an old Singer 128 sewing machine. It was able to cleanly loosen the stuck screws with a firm hit with a hammer. One thing you need to make sure is too use the correct size impact screwdriver bit or you will damage the screw head slot. The kit only came with one small slotted bit, so I had to use one from another set of screwdriver bits.This impact driver can be used to remove both left and right hand threaded screws. You set the…
This review is only for the 1/4 inch impact driver. I have not used the 5 included bits, my assumption is that they are typical poor-to-average quality that likely won’t hold up well, especially with repeated uses, but again that’s just an assumption not fact. Quality bits alone cost more than this set so set your expectations at that level. But the driver is good quality for what’s intended. It will not help in every situation, but when it does help, you’ll wonder how you ever went without it…