Sunlite Bicycle Tube 12-1/2 x 2-1/4 (1.75) Angled 70 Degree SCHRADER valve

Just a Tube – But Love The 70-degree Angled Valve! This tube has a 70-degree angled brass valve, which makes filling the tire much easier. I used this tube on a jogging stroller 12″ wheel, and it was much easier to get the pump head on this valve, with no need to try to fit the pump head into the very small space within the wheel spokes.The valve does not stick out very much, maybe about an inch, but that makes all the difference.This is also very thick rubber tube, much heavier than the old tube I replaced…

Good for a Phil and Teds stroller I bought this tube as a replacement for one of the rear tires of the Phil & Teds Classic V2 double kit stroller. The tube fits perfectly into the tire of the stroller and it is also made by Kenda as the same as the original tube. The original tube has 12-1/2 x 1.75 x 2-1/4 printed on it. The key is the middle number which is (1.75). Before buying this tube, I bought another tube 12-1/2 x 2-1/4 by Forte at a local bike shop. It didn’t fit because it was too big. This tube works great for my…

Way nicer than I expected! Wow, was I pleased with this tube! Why? It has two GREAT features that overcome a major problem with filling the tire with air: the valve stem is brass and it is angled outwards.Problem: because the small wheel has spokes that are very close to the air stem, a normal rubber, vertical stem has to be pulled sharply to the side in order to get the air hose over the nozzle. Every time this is done, the rubber stem is both stretched on one side and also driven against the relatively…