Bell SOLID Tube NoMorFlat Bicycle Inner Tire Tube 20 x 1.75-1.95

These are perfect for a garden cart or stroller or … an aluminum brake. I got tired of replacing inner-tubes on my wheels. I admit I have a very odd setup. I put wheels from a jogging stroller on my aluminum brake so I can move it around by myself. The setup works great, but it is a lot of weight on the wheels (over 200 lbs). I was concerned these NoMorFlat tubes wouldn’t hold up to the weight, but they do. It was difficult to install them under the tires, but not impossible. I was worried I was going to wreck the rubber on the wheels towards the end, but…

Measure Your Rims Before Buying I’m a pretty big guy weighing in at 300lbs, and i’ve been using the 26in. tubes for 3 years on two different bikes- a Giant Boulder, and a Mongoose MGX element. There’s something important that the manufacturers neglected to take into account. The rims on my Boulder are 1-1/4″ wide(that’s outside to outside), while the rims on my element are only 1″ wide. This makes a huge difference! The ideal combination for the 26in. tube is: a 1-1/4″ wide rim, and the 1.75 tire, like on my Boulder(i…

Mandatory for Electric bike (EBike) rear wheel.. This posting was amended on Dec. 13, 2017.. I weigh 185 pounds..I am using this tube on the following bikes: 2018 X-Treme Trail Maker Elite (TME) electric bicycle and also on a 2018 X-Treme Sedona dual suspension electric bicycle.. This type of bike has a VERY heavy rear end/wheel section. The disconnect/re-connect of electrical wires, combined with an oblong (instead of round) rear axle, AND the usage of disc brakes, also enters the picture. It is very awkward to deal with a flat…