Wolf Tooth Components Lindarets GoatLink Shimano Direct Mount Rear Derailleur
Does not work with direct mount native frames or SRAM rear derailleurs
Product Features
Compatible with 2013 or later Shimano 10-speed Shadow Plus rear derailleurs that use the 8mm Direct Mount intermediate link whose link is 7.9 – 8.1mm thick
Does not work with direct mount native frames or SRAM rear derailleurs
Improves chain wrap and reduces premature shifting degradation by replacing the Direct Mount link from compatible Shimano ten-speed rear derailleurs
The fastest route to improved wear and long-term shifting performance on wide-range 1×10 drivetrains that utilize Shimano Shadow Plus derailleurs
Goatlinks are designed to optimize the derailleur’s position relative to your cassette. Offered in two versions – a 10-speed and 11-speed, each is intended to improve the shifting of your 1
Exactly the right tool for the job of running a 11-42 cassette on a new shimano 10 speed deraileur. I wanted to upgrade my 9 speed shimano to a 10 speed with a 11-42 cassette. This device is exactly the perfect tool for it. You can’t fit larger than a 34 cog on a stock shimano. Well, technically you might be able to get a 40 on there if you extend the b-screw a bit but then you have an overtensioned deraileur running at a funny angle and wearing your cogs. This is the right solution. No need to crank the b-screw it. This item works with modern Shimano derailures that have a removable…
Works Great! I converted my bike to a 1x and a 10 spd 11-42 cassette and while I could of adjusted the b-screw slightly I opted (at time of purchase) to also get the Goatlink just in-case, which is only slightly longer then the stock Shimano Direct Mount that was on my derailleur (Shimano XT Shadow, Long Cage) but the good news is I didn’t even need to touch the B-Screw or anything else, basically just plug n play, first try all gears shifted fine and no adjustments needed, plus I assume chain wrap is…
Got the basket in yesterday and took it for a spin today. I was stressing myself out befor...
UrRider Front Mount Child Bike Seat, Portable, Foldable & Ultralight Kids’ Bike Carrier Kids’ Seat with Handrail for Cruiser Bicycles, Folding Bicycles, City Shared Bikes
Mini Bike Pump Sportneer Bicycle Pumps 160 PSI – Fits Presta and Schrader – for Mountain, Road & BMX Bikes, with Glueless Puncture Repair Kit, Mount Kit, Ball Needle Valve and Tire Lever
Voilamart 26″ Rear Wheel Electric Bicycle Conversion Kit, 48V 1000W E-bike Motor Kit with LCD Display, Intelligent Controller and PAS System, 750W Power Limited for Road Bike
Bike Phone Mount Holder, 360° Rotation Universal Bicycle Handlebars Car Mount Holder Bracket with Free Rubber Strip Desktop Adjustable Cell Phone Holder for iphone X 8 7 6 6s Plus Se 5 5s 5c Samsung
Loading...
Exactly the right tool for the job of running a 11-42 cassette on a new shimano 10 speed deraileur. I wanted to upgrade my 9 speed shimano to a 10 speed with a 11-42 cassette. This device is exactly the perfect tool for it. You can’t fit larger than a 34 cog on a stock shimano. Well, technically you might be able to get a 40 on there if you extend the b-screw a bit but then you have an overtensioned deraileur running at a funny angle and wearing your cogs. This is the right solution. No need to crank the b-screw it. This item works with modern Shimano derailures that have a removable…
Works Great! I converted my bike to a 1x and a 10 spd 11-42 cassette and while I could of adjusted the b-screw slightly I opted (at time of purchase) to also get the Goatlink just in-case, which is only slightly longer then the stock Shimano Direct Mount that was on my derailleur (Shimano XT Shadow, Long Cage) but the good news is I didn’t even need to touch the B-Screw or anything else, basically just plug n play, first try all gears shifted fine and no adjustments needed, plus I assume chain wrap is…